ALUMINUM PANTS'OANE NAKO

Tlhaloso e Khutšoanyane:

Alucosun Haufinyane ®  e hlahisa likarolo tse ncha tsa moloko o mocha ka aluminium ea mantlha ho fapana le polyethylene e tloaelehileng kapa konokono e nang le diminerale. Sehlahisoa sena se secha se bitsoang aluminium lattice panel se hlahisoa ke Alucosun bakeng sa litlhoko tse tiileng tsa melao ea ho thibela mollo lihlahisoa tsa meralo.

E entsoe ka 100% aluminium sebopeho, karolo ea Alucosun aluminium lekhoakhoa e kopantsoe le ts'ebetso e sa tloaelehang ea mollo, bobebe le boiketlo ba ho etsa likarolo li etsa Alucosun aluminium lattice panel ho toro ea lihahi.


Product Qaqileng

Lihlahisoa tsa Product

TLHALOSO EA SEHLAHISOA

Alucosun Haufinyane ®  e hlahisa likarolo tse ncha tsa moloko o mocha ka aluminium ea mantlha ho fapana le polyethylene e tloaelehileng kapa konokono e nang le diminerale. Sehlahisoa sena se secha se bitsoang aluminium lattice panel se hlahisoa ke Alucosun bakeng sa litlhoko tse tiileng tsa melao ea ho thibela mollo lihlahisoa tsa meralo.

E entsoe ka 100% aluminium sebopeho, karolo ea Alucosun aluminium lekhoakhoa e kopantsoe le ts'ebetso e sa tloaelehang ea mollo, bobebe le boiketlo ba ho etsa likarolo li etsa Alucosun aluminium lattice panel ho toro ea lihahi.

Karolo ea aluminium ea lekhoakhoa e entsoe ka karolo ea aluminium e sa cheng ebile e le sandwich pakeng tsa 0.7mm le 0.5mm aluminium e teteaneng (kantle ea AA3003 kapa AA5005) bakeng sa bokantle ba mokokotlo.

alp

Prorerity e sa cheng mollo

eu EA-13501-1-BS Boitšoaro ba mollo- A2
Tlhahiso ea mosi- s1
Marotholi a tukang- d0

Litekanyo

KHAHLISO ALUCOSUN®
BONOLO BONOLO 3MM, 4MM
BONTS'OA BOTSOANE 0.50MM, 0.60MM, 0.70MM
BOPHARA 1220MM, 1250MM, 1500MM, SIZE E LOKiselitsoeng
BONOLO Range 1000MM-5000MM
BOIMA 3.8KG / M (0.5,0.4 / 4MM); 4.3KG / M (0.7,0.5 / 4MM)
MOKHATLO MOTLATSI EA3003, AA5005

MELEMO PUO

● Boima bo bobebe:

Ka boiphihlelo ba mahlale a mantlha, phanele ea Alucosun lekhoakhoa e na le boima bo bobebe bo eketsehileng ha e bapisoa le lisebelisoa tse tloaelehileng tse sa keneleng mollo tse seng li le bobebe ho feta thepa e 'ngoe e nang le botsitso bo tšoanang. E boloka le litšenyehelo tsa lipalangoang le litjeo tsa basebetsi.

asp3

● Ts'ebetso e sa cheng mollo:
Sebopeho sena se tiisa karolo ea ho se khone ho chesa le ho e etsa hore e tšepahale hape e tsebahale lits'ebetsong tsohle tsa façade, haholo-holo USA (NFPA285), UK (BS 476-4 standard) le Australia (standard AS1530.1) moo ho nang le tlhoko e phahameng le tlhokeho ea ho lieha ho sebetsa.

asp4

● Tikoloho e mosa:
Kaha re setho sa lefats'e la rona, re na le boikarabello ba ho sireletsa naha ea habo rona. Karolo ea rona ea masenke ea aluminium ea phanele ea Alucosun A2 e ka sebelisoa hape ka 100%. Hape ha ho na tšilafalo nakong ea tlhahiso le ts'ebeliso.

asp5

● Matla a Peel
Aluminium lattice paneli ea mantlha ke lisebelisoa tse sa bonoeng joalo ka maqephe a mabeli a sekoahelo. Boitsebiso bo tšoanang bo na le boiphihlelo bo fokolang ba mocheso le khatello ea maikutlo. Ho sa le joalo re na le ho lekola matla a beke le beke ka matsatsi a 30 kamora tlhahiso. Liphanele tsa rona ha li na delamination.

asp6

● Chefo ea Mosi

Boholo ba mafu a mollo ha a bakoe ke ho cha, empa ke ho hema mosi, Alucosun A2 core ke aluminium e hloekileng ebile ha e che. Ha li-cores tsa likarolo tse ling tsa moetlo tse sa cheng mollo e le likarolo tsa lik'hemik'hale, ka hona liphanele tsa rona tse ncha li bolokehile haholo ebile lia tšepahala kaha ha e na se lokollang ha e futhumetse.

asp7

● Bofokoli:
Aluminium lekhoakhoa la phanele ea aluminium e bonolo hore e ka rengoa le ho koaloa le ho apesoa hanyane ho li-routers. Ka hona, e boloka tekanyetso ea hau le nako. E nka libopeho tse fapaneng tse fapaneng mme boits'oaro ba eona bo phethahetseng ha bo ame botsitso kapa mmele oa eona.

asp8

LITLHAKU TSE KHOLO

LITLHARE MOEKETSI MAEMO BOEMO kapa UNIT LIPHOLO
Boima ba Yuniti EA-792-ASTM Kg / m² 4.3
Aluminium Front Thick - limilimithara 0.7
Ho roala botenya EN ISO 2360-2003 μm 32
Bothata ba pentšele EA-337-ASTM HB mets 2H
Tšusumetso Khanyetso ASTM D2794 kg. cm 110
Ho roala ho tenyetseha EA-415-ASTM T-koba (0-3T) 2T
Ho roala sekhomaretsi EA-335-ASTM Ha ho tahlehelo ea mamarello E fetisitsoe
Ho boloka 'mala EA-224-ASTM Tekanyetso ea Max Max 5 kamora lihora tse 4000 E fetisitsoe
Ho boloka boitsebiso EA-523-ASTM 80% kamora lihora tse 4000 E fetisitsoe
Khanyetso ea Chalk EA-424-ASTM Likarolo tsa Max Rating 8 kamora Lihora tse 4000 E fetisitsoe
Khanyetso ea Metsi a belang AAMA 2605 100 bakeng sa metsotso e 20 Ka tlase ho 5% 4B
Khanyetso ea Muriatic Acid AAMA 2605 Marotholi a 10 a 10% HLC, 15mins Ha ho bliste
Khanyetso ea Alkali EA-1308-TL 10%, 25% NaOH, 1 Hora Ha ho phetoho
Letsoai Spray Khanyetso EA-BST-1111 Upto 4000 Lihora Ha ho phetoho
Mocheso o tlase o phahameng - -40 - 80 Ha ho phetoho
Matla a Peel EA-1781-ASTM limilimithara · N / limilimithara 140mm · N / mm (Letlalo le ka pele) 125mm · N / mm (Letlalo le ka morao)
Matla a tšepe ASTM E8 Mpa 5mm / mets, 69MPa
Index ea phokotso ea molumo oa boima ba 'mele ISO 717-1: 2013 db 22 (-1, -2)

TIISETSO

Guarantee e tloaelehileng ke lilemo tse 15 - 20 ho latela sebaka sa merero e nepahetseng. Guarantee ea lilemo tse 30 ea fumaneha bakeng sa lihlahisoa tse phahameng tse tšoanelehang tse holim'a metsi.

Mefuta e fapaneng ea mebala le qetello e etsa Alucosun Latest®khetho e ratoang haholo ea enfelopo ea moaho. Mefuta e fapaneng ea li-spectra, ho tšoarella ha boleng ba sistimi ea pente ea qetello jj. e etsa hore e lumellane le ts'ebeliso efe kapa efe ea ho roala hore na ke moaho oa khoebo, sebopeho sa setšoantšo se nang le boitsebahatso bo ikhethileng kapa lebitso le tsebahalang. Alucosun Haufinyane®e fana ka mefuta e fapaneng ea maemo le litloaelo tse tsoang kantle ho ntlo ho koahela li-coil. Alucosun Haufinyane® bokaholimo bo felile ka PVDF le NANO sistimi ea pente ka ts'ebetso e tsoelang pele ea ho roala li-coil e netefatsang boleng le ts'ebetso e lumellanang le tumellano ea AAMA 2605.

PVDF sistimi ea pente e nang le lehoakhoa la 70% la PVDF e tsejoa ka ho hanela mahlaseli a UV ka bongata le litlamorao tsa tikoloho ka hona Alucosun® ke ts'ebetso e tšoarellang le e sa fetoheng maemong a leholimo a feteletseng.

NANA-PVDFke mokhoa oa ho itlhoekisa oa pente. Sistimi e joalo ea Paint e fana ka seaparo se hlakileng se holimo se hlakileng se nang le likaroloana tse amanang haholo tsa NANO ho PVDF Finish; e netefatsang bokaholimo bo boreleli. Bokaholimo bo boreleli le bo hlakileng bo etsa hore litšila le lerōle li se ke tsa khomarela tse fang moaho ponahalo e hloekileng kamehla. Lits'ebetso tsa pente ea PVDF le NANO li tiisetsa haholo lilemo tse 15-20 tsa ho qeta waranti.

HLALOSITSOE likarolo tse nang le likhetho tse fapaneng tsa FInish lia fumaneha Alucosun®leha ho le joalo e tlas'a meeli e itseng ea nako le boholo. Ka tlhaho e sirelelitsoeng ke liphanele tsa anodized li tšoarella haholo ha li qalella ho fana ka waranti ka lilemo tse 30.

PE le HDPElipente li sebelisoa haholo lits'ebetsong tse ngata ka lebaka la mebala e pharalletseng ea mebala le tlhokomelo ea moruo, joale lilemo tsa netefatso li ka atolosoa ho tloha ho lilemo tse 5 ho isa ho tse 8 ka mefuta e fapaneng ea ho roala. Liphetho tsa HDPE li fumaneha hape joalo ka sistimi ea pente e tloaelehileng.

asp9

LITLHAKISO LITLHAKISO

asp10

Ha karolo ea aluminium ea lekhoakhoa e ntse e hahuoa, e tla be e seseha ka lehlakoreng la lesaka mme e kanna ea bula V-groove le U-groove, jj ho latela tlhoko ea lesaka, litsela tse 'maloa tse tloaelehileng tsa ho sisinyeha. E tla sebelisa mochini o ikhethileng oa "grooving" bakeng sa phanele ea aluminium ho netefatsa hore botebo ba eona ha bo senye lisebelisoa tse fapaneng tsa aluminium mme e tla sala e le botenya ba 0.8 mm. E kanna ea nka mehato e matlafatsang joalo ka likhopo tse moeling, jj joalo ka ha ho hlokahala karolong ea grooving.


  • E fetileng:
  • E 'ngoe:

  • LIEKETSO MABAPI