ALUMINUM POLOKO E SOLOLI

Tlhaloso e Khutšoanyane:

Alucosun SOLID® ke Aluminium Solid e pentiloeng pele ho liphanele tsa lits'epe tse kholo tsa aluminium tse nang le botenya bo fapaneng le likhetho tsa nishing tse loketseng hantle bakeng sa marang-rang, marulelo le lits'ebetso tsa siling. E nkuoa e le e 'ngoe ea masela a tšoarellang ka ho fetesisa, a bolokehileng, a moruo le a thabisang a fumanehang matsatsing ana.

Alucosun SOLID ® e khetholloa e le sekhahla sa Class A1 Fire Resistant facade se lekiloeng khahlano le EN13501 le ho tšoarella ha eona ho bakoang ke thepa ea seaparo sa PVDF e nang le mebala e fapaneng mme e qeta lisutu ho lits'ebetso tse fapaneng.


Product Qaqileng

Lihlahisoa tsa Product

TLHALOSO EA SEHLAHISOA

Alucosun SOLID®ke Aluminium Solid e pentiloeng pele ho liphanele tsa lits'epe tse kholo tsa aluminium tse nang le likhetho tse fapaneng tsa botenya le bohloeki tse loketseng li-façade, marulelo, lits'ebetso tsa siling. E nkuoa e le e 'ngoe ea masela a tšoarellang ka ho fetesisa, a bolokehileng, a moruo le a botsoalle a fumanehang matsatsing ana.

Alucosun SOLID ® e khetholloa e le façade ea Class A1 Fire Resistant façade e lekiloeng khahlano le EN13501 le ho tšoarella ha eona ho nkoang e le thepa ea seaparo sa PVDF se nang le mebala e fapaneng ebile e qeta lisutu ho lits'ebetso tse fapaneng.

SEBOPEHO PANEL

PANEL STRUCTURE

Litekanyo

Tlhaloso Boholo E tloaelehileng
Botenya ba phanele 2-5mm 2mm, 3mm
Bophara 1000-1500mm 1250mm, 1500mm
Bolelele 1000-5800mm 2440mm, 3050mm, 3200mm
Motsoako Type AA 1000, AA 3003, AA 5052 EA 1100, AA 3003
Boima ba 'mele 8.2kg / limithara2 bakeng sa 3mm

Mamello ea Panel

Teba
 Mamello
Bophara (limilimithara) 0 ho -0.4mm
Bolelele (limilimithara) ± 3mm
Botenya (limilimithara) ± 0.2mm
Phapang ea Line ea Diagonal (mm) Mm5mm
Boemo bo otlolohileng (mm Mm1mm

Mechini le Meaho ea 'mele

Tensile Ultimate MPA tse 185
Tlhahiso ea Tensile MPA tse 165
Ho kopanya @ Break 1-4%
Modulus ea Elasticity EA-68.9-GPa
Shear Modulus 25 GPa
Kgaola Matla MPA tse 110
Thermal Conductivity 154 W / mk
Qhibiliha Point 643 - 654 C
Mocheso oa Annealing 413 C.
Matla a khoheli a itseng 2,73 G / C.

Liaparo tse tiileng tsa Aluminium Pvdf

S. Che Mekhahlelo Yuniti Tekanyetso Sephetho
1 Bitiela Type - - PVDF e thehiloeng ho barbara ea fluorocarbon 15-20
2 Coating tiisetso ya - - Lilemo tse 15-20
3 Gloss @ 60 lengolo la % EA-523-ASTM 20-80
4 Boemo (T-bend) T EA-D1737-62 2T, ha ho na ho petsoha
5 Khutlela tšusumetso- crosschch - NCCA II-5 Ha ho khethoe
6 Thata-pentšele mets EA-337-ASTM Min
7 Adhesion Metsi a belang a omileng - ASTM D3359, mokhoa oa 8 37.8 ° C, lihora tse 24. 100 ° C, metsotso e 20. Ha ho khethoa Ha ho khethoe Ha ho khethoe
8 Khanyetsa khorofo lilithara / mil ASTM D968-93 (Lehlabathe le oelang) 40
9 Khanyetso ea Lik'hemik'hale - ASTM D1308-87 ASTM D1308-87 ASTM D1308-87 AAMA2605 ASTM D2248-93 Ha ho phetoho
10% HCL (Teko ea Spot ea Metsotso e 15)
20% H2SO4 Lihora tse 72
20% NaOH Lihora tse 18
Seretse Pat teko 24 Hours
Detergent, tharollo ea 3%, 38ºC, 72hrs
Boemo ba leholimo
10 Teko ea boemo ba leholimo-o-mitha - Boholo. Diyuniti tse 5 kamora lilemo tse 10
Ho boloka mebala EA-D2244-93 Min 50% kamora lilemo tse 10
Ho boloka boitsebiso EA-D523-89 Boholo. Diyuniti tse 8 bakeng sa mebala le 6 bakeng sa
Ho hanyetsa tjhoko White ka mor'a lilemo tse 10
11 Ho hanyetsa letsoai ka letsoai Lilemo ASTM B117-90 Blister-10, mongoli-8, kamora 4000
lihora, 35 ° C moholi oa letsoai
12 Ho hanyetsa mongobo Lilemo EA-D2247-94 Ha ho na machachetsi Kamora lihora tse 4000, 100% RH, 38 ° C

Polokeho ea Mollo

Alucosun SOLID®  e ea lekoa ho latela EN13501 e hlophisitsoe sehlopheng sa A1 eo ka kotloloho e leng sehlahisoa se sa cheng. Tumellanong le khoutu ea polokeho ea bophelo ea NFPA le liofisiri tse fapaneng tsa taolo tse sa cheng li lumelloa mohahong oa mefuta eohle ntle le thibelo. Ntlheng ena, AlucosunSOLID ®ka sehlopha sa A1 ho ka kenngoa mehahong ea bolelele le mofuta ofe kapa ofe.

Ntho ea Teko Sephetho
EN13501-1 Sehlopha sa A1
AS1530.1 E sa cheng

fid

E mosa

Aluminium e nkuoa e le tšepe e nchafalitsoeng ea liindasteri; ha e na khoholeho ea tšepe e boima. Aluminium e ka sebelisoa hape ntle le phapano ea boleng. Aluminium e nchafalitsoeng ha e khethollehe ho tsoa ho aluminium ea moroetsana, ts'ebetso ha e hlahise phetoho ea tšepe, ka hona aluminium e ka sebelisoa bocha ka ho sa feleng. Ho nchafatsa aluminium ho boloka 95% ea litšenyehelo tsa matla tsa ho sebetsana le aluminium e ncha.

Mebala e mebala e sebelisitsoeng tsamaisong ea pente nakong ea tlhahiso ea Alucosun Solid ®ha e kotsi. Ha e ntse e koahela liphanele tse tiileng theknoloji e sebelisitsoeng ho sebetsana le eona e lumellang li-solvents tse lokollotsoeng lipenteng lia chesoa ebe li fepeloa ts'ebetsong.

E qeta

MEBALA LE QETELA
Alucosun SOLID®bokaholimo bo qetile ka PVDF le Nano system ea pente ts'ebetsong e tsoelang pele ea ho roala li-coil e netefatsang boleng le ho tsitsisa ho latela melao ea AAMA 2605. Mebala e tiileng ka kakaretso ke liaparo tse peli (26 +/- 1 µm) ha tšepe e le liaparo tse tharo (3) (32 +/- 1 µm).

PVDF
Sistimi ea pente e nang le lehoakhoa le tlase la 70% PVDF e tsejoa ka ho hanela mahlaseli a UV le litlamorao tsa tikoloho, ka hona Alucosun SOLID ® ke ts'ebetso e tšoarellang le e sa fetoheng maemong a leholimo a feteletseng.

NANO PAKO
Sistimi e fana ka topcoat e hlakileng e hlakileng e nang le likaroloana tsa Nano tse amanang haholo le sefapano qetellong ea PVDF; e netefatsang bokaholimo bo boreleli. Bokaholimo bo boreleli le bo hlakileng bo etsa hore litšila le lerōle li be thata ho khomarela tse fang moaho ponahalo e hloekileng kamehla. Nano PVDF ke mokhoa oa ho itlhoekisa oa pente.

PVDF le NANO
Lisebelisoa tsa pente li tiisetsa haholo lilemo tse 15-20 tsa ho qeta waranti.

HLALOSITSOE
Liphanele tse nang le likhetho tse fapaneng tsa ho qeta li fumaneha ka Alucosun SOLID ®  leha ho le joalo e tlas'a meeli e itseng ea nako le boholo. Ka tlhaho e sirelelitsoeng ke liphanele tsa SOLID tsa lera la anodized li tšoarella haholo 'me li fana ka waranti ka lilemo tse 30.

Ho kenya

Mekhoa eohle e tloaelehileng le ea sejoale-joale ea ho kenya li-facade e ka sebelisoa ho kenya li-panels tsa SOLID. Khetho e 'ngoe ea ho lokisa e patiloeng e e etsa e fapane le lihlahisoa tse kopaneng tsa ho koahela. Mefuta efe kapa efe ea concave, khonvese, sekhutlo, sekoahelo sa kholomo, li-softs, sekhurumetso jj e ka qaptjoa le ho hlomamisoa habonolo. Bakeng sa ho fumana katoloso ea mocheso o tšoanang ho kgothaletswa hore o sebelise sebopeho se nyane se entsoeng ka Aluminium. Ho kgothaletswa ho sebelisa liphanele ho tsoa ts'ebelisong e le 'ngoe le ho lokisa junifomo bakeng sa qetello e ntle.

Adhesive tlamo

Alucosun SOLID® e hlahisoa ka mokato o mosesane oa lacquer ka lehlakoreng le ka morao ho netefatsa tlamo e matla le likhomaretsi ka hona e ka hokahanngoa ka kotlolloho mohahong o se nang lisebelisoa tsa ho lokisa tse bonahalang.

Tjheseletsa Stud

Likarolo tsa botenya ba 3 mm le tse kaholimo li bolokehile ho li cheseletsa (ISO 14555: 2017) e nang le li-bolts tsa stud ka morao ho phanele bakeng sa ho lokisa ho patiloeng. Motsoako 3003 le 5005 sebediswa bakeng sa diphanele molemo bakeng sa morero oa ho tjheseletsa. Ho tjheseletsa ka lehlakoreng le ka morao la li-Panels tse nang le 3 mm le kaholimo ho ke ke ha e-ba le tšusumetso holim 'a marang-rang.

asp2

Alucosun ® Morero oa Wis om Metal Composites Ltd oa hore brin gs e hlahise lihlahisoa tsa mantlha ka ts'ebelisano le moaho oa rona o tummeng oa tlhahiso o fumanehang Jiangsu, o ts'oarang likhakanyo tse peli tsa boiphihlelo bo botle ho Aluminium Panel Industry.

Alucosun ®cha e fanang ka litlhoko tsohle tsa karolo ea hau ea meralo, ekaba ke sefahleho, marulelo, siling, papatso, boitsebahatso ba khoebo. Ho hlomelloa ka lits'ebeletso tsohle tsa ka tlung ho netefatsa boitlamo ba sehlahisoa le peiso.

Re fana ka lihlahisoa tse ntle ka ho fetesisa ka ts'oaetso; e fihlelletsoe ke motsoako o motle oa litsebi tsa indasteri, mahlale a morao-rao le mechini e tsoetseng pele.

Setsi se thehiloeng ho hlahisa limilione tse fetang 10 M2 ka selemo, se nang le limela tse tharo (3) bakeng sa Tlhahiso e fapaneng ea Panel, Colour Coating hammoho le Laborator ea ka tlung e nang le thepa e ntle.

Alucosun  ®e sebetsa hohle Bochabela bo Hare, Bochabela bo Hare, Europe le Amerika. Liofisi tsa rona tsa lebatooa, balekane ba khoebo, baemeli le barekisi tikolohong eohle ba re nolofalletsa ho fihlela litlhoko tsa hau bakeng sa thepa ea rona ea kaho le lits'ebeletso tsa tšehetso hohle moo o li hlokang.


  • E fetileng:
  • E 'ngoe: